Status Line - InfraTec VarioCam Operating Instructions Manual

menu item "Measuring Points ..." in the "Measurement" menu.
Automatic functions
Find Maximum
Find Minimum
The maximum or minimum temperature of the complete thermal image is automatically displayed by
pressing the corresponding buttons. If two-dimensional measuring areas (rectangle, ellipse, and polygon)
are defined, the maximum or minimum inside these areas is displayed simultaneously.
If the maximum value only occurs for a single pixel, the value is displayed with a bright yellow
background. If several pixels have the same measurement value, the display has a red background.
The maximum or minimum is removed from the thermal image by pressing the corresponding button
again.
Additional functions
Audio comment
VIS image
Existent additional information can be showed with these buttons, e.g. an audio file(.wav) saved in the
thermoimage or an image saved in digital camera. If this information is not existent, these buttons turn to
be grey.

11.3 Status line

There is a status line at the bottom edge of the IRBIS
currently loaded thermal image and its representation is displayed.
®
Fig. 170 IRBIS status line
The output fields have the following meanings, in their order of appearance:
Cursor position and temperature at the cursor position
Filename
Date and time the file was created
File status (O: Original file, O*: unsaved, modified original file, M: modifed loaded file)
Coordinates transformation (PPP1
Display mode (chapter 5.1
Image status (GE: global emissivity)
82
Original image location)
page 14)
© InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
®
main window where information about the
11 Software IRBIS®
Operating Instructions