Detailed Connection Description; Variocam Head (Vch) - InfraTec VarioCam Operating Instructions Manual

Detailed connection description

6
®
The VarioCAM /VarioCAM
possibilities. Thereby, it must be noted that certain components are optional and not always supplied as
accessories depending on the configuration of the thermography system.
If the VarioCAM
(electricity supply via the FireWire interface), it must be ensured that the FireWire cards
recommended by Infratec are used. Otherwise Infratec makes no guarantee of functionality.
When using the FireWire interface of the VarioCAM
must be connected to the PC/notebook first and then connected to the VarioCAM
LEMO connector.
6.1 VarioCAM
Vch with FireWire cable and power
supply
®
The VarioCAM head is connected with the 6-pole
LEMO socket using the 6-pole FireWire cable
from the notebook (4-pole)/PC (6-pole). The
power supply is connected to the 14-pole LEMO
socket of the VarioCAM
The Adapter P (power supply adapter) must
only be used in connection with the power
supply!
Vch with power supply and universal
cable
®
The VarioCAM head is supplied with electricity
via the power supply (without adapter). The 6-pole
LEMO connector of the VarioCAM
supply is connected with the 6-pole LEMO socket
®
of the VarioCAM head. The universal cable is
connected to the 14-pole LEMO socket of the
®
VarioCAM head.
14
®
head can be connected with the PC/notebook using the following connection
®
head thermography system is operated without a power supply on a PC
® head (VCh)
®
head via the Adapter P.
®
head power
© InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
®
/VarioCAM
Fig. 10 Vch with 6-pole FireWire cable and power
supply
Fig. 11 Vch with power supply and universal cable
6 Detailed connection description
®
head, the FireWire plug
®
with the
Operating Instructions