InfraTec VarioCam Operating Instructions Manual page 41

Operating Instruction for VarioCAM® head
7 Menu structural VarioCAM® head
Menu item "Automatic"
Fig. 78 Menu "Settings"
The available automatic functions of the camera are centralised under the "Automatic" menu item:
The options "Level" or "Range" provide automatic adjustment of the infrared image in relation to the
temperature level or temperature range used. If one of the two functions is active, this is indicated by a
checkmark in front of the menu line.
Fig. 79 Dialogue "Auto Saving"
On selecting "Save", a dialogue is displayed, which allows a sequence of infrared images to be recorded.
The starting time of the recording must be entered in the first field. The current time is the default here.
The time can be adjusted with the
between the individual time fields. When setting the time, it should be noted, that this is in the range of
00:00:00 to 23:59:59.
The field "Interval" contains the frequency by which a thermographic image is being taken (in seconds).
The field "Number" indicates the number of thermographic images to be taken. To reduce the noise of
the thermographic image to be saved some thermographic images can be accumulated which is
determined by checking the field "PremiumSnap". The values of each single field can be set by moving
the joystick -, ¯, ¬ and ®. By pressing the T-button the field is being selected. The setting of the
sequence has to be confirmed by Enter. Pressing the C-button all settings are deleted and the dialogue is
exited.
Operating Instructions
"Automatic"
- ¯
and joystick keys. The
© InfraTec GmbH 2007
¬ ®
and joystick keys can be used to move
37