InfraTec VarioCam Operating Instructions Manual page 79

Operating Instruction for VarioCAM® head
10 IRBIS® remote Software
Applying the changes
Fig. 161 Dialogue window "Restart needed" after modifying options
Click the "OK" button (see Fig. 144) to apply the changes. Afterwards, all settings are saved. If a
program restart is necessary after applying the changes, the dialogue shown in Fig. 161 is displayed. This
dialogue must be confirmed with "Yes". If "No" is selected, the program does not restart and the
changes do not become effective until the next time the program is started.
It is possible to cancel the Options dialogue in order to discard the changes. This is done with the
"Cancel" button in the dialogue shown in Fig. 144.
Operating Instructions © InfraTec GmbH 2007 75