InfraTec VarioCam Operating Instructions Manual page 91

Operating Instruction for VarioCAM® head
11 Software IRBIS®
Menu item "Options"
®
It is possible to adjust the appearance and individual IRBIS controls via a dialogue.
Tab "Presets"
Fig. 178 "Options", tab "Presets"
Category "Autosave"
®
Selecting both the checkboxes "Autosave" - "On Exit" and "Desktop", causes the state of the IRBIS
window to be saved on ending the program, so that it is automatically resumed at the next program start.
Category "Scale: division lines"
The temperature scale display can be altered using the choice of "Scale: division lines" - "Without" or
"With".
Category "Decimals at temperature values"
The number of decimal places can be defined using "Decimals at temperature values".
Category "Export"
If the checkbox "Expand PCX" under "Export" is activated, all thermal images will be interpolated before
exporting.
Category "Fixed start values"
"Fixed start values" means, that the level and the range are fixed using numeric entries, if the checkbox
®
is activated. This change takes effect the next time IRBIS is started.
Category "Point label"
With the choice of "Point label" - "Label" or "Value", it can be defined whether a measuring point
should have the description or the temperature value on the label.
Operating Instructions © InfraTec GmbH 2007 87