Operating Instruction for VarioCAM® head
9 Hardware and Software Installation
Driver installation under Windows XP
9.3.2
®
The hardware drivers for the VarioCAM
are automatically copied into the "/driver" subdirectory with the
®
®
installation of the IRBIS
control software. If the installation of the IRBIS
control software has been
completed successfully, the hardware installation can be started with the Windows add new hardware
wizard:
Fig. 115
Microsoft Windows Found New Hardware Wizard
start dialogue
In this part of the wizard, the option "Install from a list or specific location (Advanced)" must be
selected. Afterwards, continue the wizard with "Next >".
52
© InfraTec GmbH 2007
Operating Instructions