InfraTec VarioCam Operating Instructions Manual page 78

Fig. 157 Input field "Time For Longclick [ms]" on the "Additional" tab
For operating the camera, there is a distinction between short and long clicks (see chapter 10.3
76). In order to reproduce this function on the PC, the time in milliseconds for a longclick can be adjusted
via the "Time For Longclick [ms]" input field shown in Fig. 157.
The time for a longclick should not be set too short, otherwise it can happen, that every
press on a button is evaluated as a longclick.
Fig. 158 Input field "Q-Filter Param For FPS" on the "Additional" tab
The speed in images per second (FPS) is shown in the status line for the analogue video image. The
individual data is filtered so that the display of the value is steadier. The necessary parameter for this is
adjustable with the "Q.Filter Param For FPS" input field on the "Additional" tab (see Fig. 158). The
smaller this value the less influence there is from strong data deviations. One should be used as the
maximum value. The incoming new data are 100% included in the calculation of the images per second.
Fig. 159 Input field "Update Interval for FPS [ms]" on the "Additional" tab
An additional adjustable parameter for the display of the images per second of the analogue video image
is available via the "Update Interval for FPS [ms]" input field (see Fig. 159). Here, the time interval in
milliseconds is entered, for which the display of images per second should be updated in the status line.
The smaller the selected time the more often the value is updated. This can result in a flickering of the
display.
Fig. 160 Input field "Firewire
®
The VarioCAM head registers at the system with an entry into the Windows
a few seconds. In input field "Firewire
connection from PC/Notebook to thermography camera should take, in order to set an entry on the
system for the availability of the thermography camera. The value should not be smaller than 10.
74
Wait For Ready Time [sec]" on the "Additional" tab
Wait For Ready Time [sec]" can be specified, how long the
© InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
10 IRBIS® remote Software
registration. This can take
Operating Instructions
page