Operating Instruction for VarioCAM® head
10 IRBIS® remote Software
10.2 Changing the options
Fig. 143 "Options" tab
Fig. 144 "Additional" tab
Fig. 145
Program system menu
The dialogue shown in Fig. 143/Fig. 144 is used for additional software settings. This dialogue is reached
by clicking on the "Options..." entry in the application's System Menu (see Fig. 145). It has several tabs.
Using the "Options " tab (see Fig. 143), general program settings can be made. For the most part,
these correspond to those of the configuration dialogue (see chapter 10.1 Configuration
page 67).
Some additional program control parameters can be adjusted on the "Additional" tab (see Fig. 144).
Operating Instructions
© InfraTec GmbH 2007
69