Execute Camera Update; Preparation; Start - InfraTec VarioCam Operating Instructions Manual

Operating Instruction for VarioCAM® head

8 Execute camera update

Execute camera update
8
8.1

Preparation

An uninterrupted power supply is the precondition of an update of the camera. IF the
update is interrupted by a failure of power supply the camera has to serviced by the
manufacturer.
Place a CompactFlash card in the PC.
Select the relevant parts of the update and the respective files and transfer them to the root of the CF
card.
Only files which are part of the update are to be copied to the root of the CF card.
Thereafter the CF card is to be put into the camera.
Parts of the update and respective files:
Firmware
Languages, default configuration, palettes, fonts, menu(s) FLSHUID.BIN
Camera configuration
Calibration
Gain correction 1 to 8
Gain correction 9 to 12, calibration 1 to 12
FPGA-Code(s)
PIC-Codes
8.2

Start

The update of the camera is started by the menu item "Settings" - "Config" - "Update.."
(see Chapter 7.4.4 page 36).
The password is "1234" and it has to be confirmed by ENTER.
Operating Instructions
FLSH1MB.BIN
FLSHCNF.BIN
FLSHCAL1.BIN
FLSHCAL2.BIN
FLSHFPGA.BIN
FLSHPIC.BIN
© InfraTec GmbH 2007 43