InfraTec VarioCam Operating Instructions Manual page 72

Category "Framegrabber"
This is used for selection of the framegrabber to be used for the display of the analogue video signal. In
the current version of the software, there is a choice of both the "Falcon" and "HaSoTec (FG33)"
framegrabber types.
This setting is disabled, if the "Video Connection" component in the category
"Components" is disabled.
Category "Resolution"
The size of the video image display can be adjusted in the category "Resolution". The camera operates
with a resolution of 320 x 240 pixels. The display size can be doubled for improved legibility of the video
image on the PC. This is done by selecting the "640 x 480" option.
Category "Others"
This section contains other possible settings.
The cable connection for the communication with the camera via RS232 can be set in the "Serial Port
No." dropdown box. All available PC serial ports are displayed in the dropdown box. The corresponding
port must be selected here.
In addition, using the "Show Special Buttons" field, you can choose whether the keyboard shortcuts for
controlling the camera should be displayed. These shortcuts will always be displayed if the checkbox for
this field is ticked.
The "Others" section is disabled, if the "Serial Communication" component in the
"Components" section is disabled.
When all the appropriate settings have been made, the dialogue can be ended. In doing so, all
configurations will be saved and the software restarted if necessary.
68 © InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
10 IRBIS® remote Software
Operating Instructions