InfraTec VarioCam Operating Instructions Manual page 43

Operating Instruction for VarioCAM® head
7 Menu structural VarioCAM® head
Menu item "Alarm" (optional)
Fig. 83 Menu "Settings"
Fig. 84 Dialogue "Alarm definition"
In the menu item "Alarm.." temperature thresholds can be defined. Is any of the thresholds reached, a
function defined in "Action" will be carried out.
If there are any spots/measuring areas activated in the thermographic image (see Chapter
7.3 page 17) the alarm function is only valid for the respective spot/area. Otherwise the
alarm function is activated for the whole image.
Two alarm thresholds can be defined. In both selection fields ("Alarm 1/2") it can be defined a
surpassing "-" and undergoing "¯" as well as averaging "M" of a temperature set in "Threshold 1/2".
The field "Action" contains the function which is to be carried out in the case of an alarm.
"S" (Save) saved a thermographic image.
"V" (Visualisation) visualised the alarm with the respective temperatures (see Fig. 85, see Fig. 86).
"X" (Extern) a trigger impuls is put to the trigger output of thermografic camera.
Display of a visual alarm in the case of surpassing and undergoing (- ¯) of the temperature
Fig. 85
thresholds in the whole thermographic image
Fig. 86 Display of a visual alarm reaching an average of the temperature (M) in measuring area 1 and
surpassing of the temperature threshold (- ) in measuring area 2
Operating Instructions
"Alarm.."
© InfraTec GmbH 2007 39