Program Description - InfraTec VarioCam Operating Instructions Manual

10.3 Program Description

Starting the program
There are several possibilities for starting the application after it has been installed. One way is to launch
the program from the Start Menu and another is to start the program with the Desktop shortcut or with the
icon in the System Tray.
Initialization
Fig. 162 Initialisation screen during the program start
The individual components are initialised after starting the program. The window shown in Fig. 162 is
displayed while doing so.
Fig. 163 Extract from the initialisation screen when the video connection is disabled
It is possible some components were disabled during the configuration (see chapter 10.1
67). The disabled components are shown like the example in Fig. 163 .
The initialisation takes place stepwise and is indicated by the following icons at the respective step.
initialisation step to be taken
Component is deactivated
Current step of initialisation
Successfully passed step of the initialisation
If an initialisation process needs to be cancelled, this can be done with the "Cancel" button in the lower
right-hand corner of the initialisation window. After that, the button is disabled and the text "Initialisation
cancelled" is displayed instead of "Initialisation in progress". Cancelling the initialisation can take
some time. The program closes automatically when the cancellation is complete.
76 © InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
10 IRBIS® remote Software
Operating Instructions
page