Menu Structural Variocam; Live-Mode - InfraTec VarioCam Operating Instructions Manual

Menu structural VarioCAM

7
After powering on (pressing the C-button) and brief initialisation, the camera is in live mode. The menu
structure of a thermografic camera can be controled by thermografic camera itself as well as by software
®
IRBIS remote (see chapter 10, IRBIS
7.1

Live-Mode

In Live-Mode, a temperature bar is displayed which allocates the object temperatures to the colour
representation of the thermal picture. The active temperature range (minimum and maximum
temperature) is represented with the temperature bar.
The colour palettes can be changed by pressing the C-button. The VarioCAM
Using the joystick, the thermal picture with respect to
temperature level
temperature range
can be optimised.
Fig. 16 Live Mode
Pressing Enter changes to Focus Mode (see Focus Mode 7.2
A long press of the T-button opens the Spot-Editor
16
®
remote Software
- ¯
¬ ®
© InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
7 Menu structural VarioCAM® head
® head
page 66).
®
-Palette is the default.
page 17).
Operating Instructions