InfraTec VarioCam Operating Instructions Manual page 31

Operating Instruction for VarioCAM® head
7 Menu structural VarioCAM® head
Menu item "Sav. format.."
Fig. 42 Menu "File"
Fig. 43 Dialogue "Saving config"
The formats for the files to be saved are configurable with the menu item "Sav. Format..". A dialog is
displayed for this (see Fig. 43). There are four possible choices available.
The following table shows the result of each selection:
Sav. format
VIS
I = save the visual image in the IRB
Audio
I = save the audio data in the IRB
Screen B = saves all of the current screen as a
BMP file
Data I = saves measurement definitions in
the IRB
With T-key (acting as tab) you can move between the individual selection fields. The selection is made
with the joystick keys -, ¯. At least one format should be selected for saving files.
Operating Instructions
"Sav. format.."
Selection 1
© InfraTec GmbH 2007
Selection 2
B = also saves the visual image
as a BMP file
W = also saves the audio data
as a WAV file
27