Configuration Mode; A.1.6 Configuration Mode - ABB DG/S 1.1 Product Manual

®
ABB i-bus EIB
A.1.6

Configuration mode

© 2006 ABB STOTZ-KONTAKT GmbH
Appendix
The DGS11 Software Tool features a configuration mode, in which the DALI
devices connected to the DG/S 1.1 are tested and the DALI address can be
changed to suit the project.
The change to configuration mode is implemented by the "Extra" button in
the "Configuration mode". The program returns to the visualisation mode by
deactivation of the configuration mode.
The configuration mode is protected by a password ("ABB") to avoid
unwanted readdressing of the connected DALI devices on the DALI-
Gateway. Enter the password in the "Password dialogue" window and
acknowledge with OK. This password can be changed if the user is working
in the configuration mode and "Change password" is selected under
"Extras".
A window appears where the new password can be determined. The old
password must be entered and the new password must be entered and
repeated.
After the user has entered the correct password, he will be in the
configuration mode.
91