ABB DG/S 1.1 Product Manual page 45

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Functional description
Device Number [1...64]
Option: A01
...
A64
These are the following options for parameter setting B
Option: B01
...
B64
The DALI devices which are to be parameterised are selected with this
parameter according to their scene values.
This parameter is visible if the parameter "overwrite the scene on download"
set with "yes".
Device Lightscene value
Option: no change
max. brightness value
100%
90%
...
10%
min. brightness value
Off
This parameter is visible if the parameter "overwrite the scene on download"
set with "yes".
This parameter defines the brightness value to which the DALI devices are
set when a scene is retrieved as a percentage. The lightscene value of the
DALI device has the "no change" default setting. Only the brightness of the
devices which are integrated into the scene has to be changed.
With the "no change" setting, the current brightness of this DALI device will
not be influenced when a scene is retrieved, i.e. the device is not part of the
scene. The device which is not shown (faded out) remains unchanged and
does not participate in the scene after a manual change in the channel
brightness and renewed storing of the lightscene.
Be careful: All DALI members connected on channel A and
B (up to 128 members) are fitted to the scene if the scene is
stored over the EIB/KNX. The scene settings from the ETS
are lost. Also the scene ("device lightscene value")
parameterisation „no change" are lost. This means all DALI
devices are members in the scene.
If the set scene brightness is higher or lower than the set maximum or
minimum value of the corresponding device (refer to the "Device" parameter
window), this value is stored in the scene but the minimum or maximum
brightness value of the corresponding DALI device is set automatically if the
scene is retrieved.
41