ABB DG/S 1.1 Product Manual page 96

®
ABB i-bus EIB
© 2006 ABB STOTZ-KONTAKT GmbH
Appendix
In configuration mode, the window in which the user was located in
visualisation mode is opened first.
With the configuration mode, it is possible to readdress the DALI devices
connected to the DALI-Gateway. The EIB / KNX assignment is also
automatically adapted in this way. Here the device number indicated by the
software tool is always the number with which the DALI device is identified
on the EIB / KNX. The actual DALI address is one less since DALI
addressing always commences with address 0.
In the "Brightness level" field it is possible to adjust the brightness with which
the selected DALI device switches on. The options 0 (off) to 254 (maximum
brightness value) are available.
Note: In DALI the value 255 does not mean maximum brightness but rather
no change in the brightness value.
If the tab "Channel A" or "Channel B" is selected, all the DALI devices of the
corresponding channel are displayed.
92