ABB DG/S 1.1 Product Manual page 82

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Project design and programming
The additional lamp can be switched with the third push button. Switching
(1/1/2) and dimming (1/2/2).
The shutters are moved UP/DOWN (long push button) via the fourth push
(1/3/0). UP/DOWN address 1/3/0 and louvre adjustment 1/3/1.
I Lighting strip 0
1
I Lighting strip 0
2
I Lamp 0
Table
Shutter
Fig. 37 Push button assignment for "Individual solution"
Short: Lighting strip 1 ON/OFF
Long: Lighting strip 1 Dimming UP/DOWN
Short: Lighting strip 2 ON/OFF
Long: Lighting strip 2 Dimming UP/DOWN
Short: Table lamp ON/OFF
Long: Table lamp Dimming UP/DOWN
Short: Shutter Louvre adjustment STOP
Long: Shutter UP/DOWN
78