5.2 SHUTDOWN ALARM
When controller detects shutdown alarm, it will send signal to open breaker and shuts
down generator. The alarm information will be displayed on LCD.
Shutdown alarms as following:
No
Items
Emergency
1
Shutdown
High
2
Temperature
Low
3
Pressure
4
Over Speed
HGM400 Series Genset Controller
When the controller detects that the emergency shutdown
signal, it will initiate a shutdown alarm and the corresponding
alarm information will be displayed on LCD.
When controller detects that the water/cylinder temperature
has exceeded the pre-set value, it will initiate a shutdown
alarm and the corresponding alarm information will be
displayed on LCD.
When the controller detects that the oil pressure has fallen
Oil
below the pre-set value, it will initiate a shutdown alarm and
the corresponding alarm information will be displayed on
LCD.
When the controller detects that the generator speed has
exceeded the pre-set value, it will initiate a shutdown alarm
and the corresponding alarm information will be displayed on
ISSUE 2015-05-27
HGM400 Series Genset Controller User Manual
Description
Version 1.6
Page 16 of 44