Pin
Function
29
Mains AC Voltage N1
NOTE: LINK interface is parameters programmable interface that can be
programmed by PC using an SG72 adapter. If there is need to remote control the
genset, please use the SG485 module produced by our company.
7 DEFINITION AND RANGE OF PARAMETERS
HGM400 Series Genset Controller
HGM400 Series Genset Controller User Manual
Cable
Size
is recommended) (HGM410 without)
Connected to N-wire of mains (HGM410
2
1.0mm
without)
ISSUE 2015-05-27
Description
Version 1.6
Page 22 of 44