Smartgen HGM400 Series User Manual page 26

No Items
29 Low Oil Pressure
30 Low Fuel Level
31 Config. Sensor
Loss of Speed
32
Signal
33 Charge Alt Failure
Battery
34
Voltage
Battery Under
35
Voltage
HGM400 Series Genset Controller
Range
(0-400)kPa
(0-100)%
(80-140)ºC
(0-400)kPa
(0-100)%
(0-20.0)s
(0-30)V
Over
(12-40)V
(4-30)V
ISSUE 2015-05-27
HGM400 Series Genset Controller User Manual
Default
When the
sensor value falls below this set
value, "Low Oil Pressure" timer is
initiated. Detecting only after
safety on delay has expired. If
103 the set value is 0, low oil
pressure signal will not be sent
(this only concerns pressure
sensor and does not concern low
oil pressure warning signal via
configurable input port)
When the liquid level of the
external sensor falls below the
set value, "Low Fuel Level" timer
10 is initiated. (this only concerns
fuel level sensor and does not
concern low fuel level warning
signal via configurable input port)
Each value correspond to above
98
28 (Temperature sensor), 29 (Oil
103
pressure sensor) and 30 (Level
10
sensor), respectively.
If the set value is 0, only warning
5.0 and not
generator.
During
running, when alternator D+(WL)
6.0 voltage has fallen below the set
value and remains for 5s, It will
initiate a shutdown alarm signal.
When battery
exceeds
remains for 20s, It will initiate a
33.0
warning
warning and not to shutdown the
generator.
When battery voltage has fallen
below the set value and remains
8.0 for 20s, It will initiate a warning
alarm signal. Only warning and
not to shutdown the generator.
Version 1.6
Description
external pressure
to shutdown
generator is normal
voltage
the set value
alarm signal.
Page 26 of 44
the
has
and
Only