Smartgen HGM400 Series User Manual page 7

Fuel Level (FL)
Engine Speed (RP)
Battery Voltage (VB)
Charger Voltage (VD)
Hours Counter (HC): Max. 999999 hours
Start times: Max.999999 times
 Control & Protection: automatic start/stop of the genset, ATS(Auto Transfer Switch)
control with perfect fault indication and protection function;
 With ETS(Energize To Stop), idle control, pre-heat control, speed raise control and
speed drop control function, All output ports are relay-out;
 Parameter setting: parameters can be modified and cannot be lost even in case of
power outage; all the controller parameters can be adjusted using front panel of the
controller or via PC using an SG72 adaptor.
 Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as
auxiliary input port or fuel level sensor while input 4 can be used as auxiliary input
port or configurable sensor.
 More kinds of curves of temperature, oil pressure, fuel level can be used directly
and users can define the sensor curves by themselves;
 Configurable sensor: can be set as temperature sensor, oil pressure sensor or fuel
level sensor, enable the detection of double temperature, double oil-pressure and
double fuel level.
 Multiple crank disconnect conditions (magnetic pickup, oil pressure, generator
frequency) are optional;
 Widely Power supply range: DC(8~35)V, suitable to different start battery voltage
environment.
 All parameters used digital adjustment, instead of conventional analog modulation
with normal potentiometer, more reliability and stability;
 Modular design, self-extinguished ABS plastic enclosure, pluggable connection
terminals and embedded installation way; compact structure with easy mounting.
HGM400 Series Genset Controller
% (Unit)
RPM (Unit)
V (unit)
V (unit)
ISSUE 2015-05-27
HGM400 Series Genset Controller User Manual
Version 1.6 Page 7 of 44