Preparing Log Files For Oracle Support Services - Oracle X6-2-HA Deployment And User's Manual

For example, the command odaadmcli show power shows information specifically
about the Oracle Database Appliance power supply:
# odaadmcli show power
NAME
Power_Supply_0 OK
(Continued)
LOCATION
PS0
Virtualized Platform
You can see the list of monitored components by running the command oakcli
show -h
To see information about specific components, use the command syntax oakcli show
component, where component is the hardware component that you want to query. For
example, the command oakcli show power shows information specifically about
the Oracle Database Appliance power supply:
# oakcli show power
NAME
Power Supply_0 OK
Power Supply_1 OK
(Continued)
LOCATION INPUT
PS0
PS1
Note:
Oracle Database Appliance Server Hardware Monitoring Tool is enabled
during initial startup of ODA_BASE on Oracle Database Appliance
Virtualized Platform. When it starts, the tool collects base statistics for about
5 minutes. During this time, the tool displays the message "Gathering
Statistics..." message.

Preparing Log Files for Oracle Support Services

If necessary, use the command odaadmcli manage diagcollect to collect
diagnostic files to send to Oracle Support Services.
Use the Bill Of Materials report saved in the /opt/oracle/dcs/Inventory/ directory,
to enable Oracle Support to help troubleshoot errors, if necessary.
HEALTH HEALTH_DETAILS
-
INPUT_POWER OUTPUT_POWER
Present 112 watts
HEALTH HEALTH DETAILS PART_NO. SERIAL_NO.
-
-
POWER OUTPUT POWER INLET TEMP
Present 88 watts
Present 66 watts
Preparing Log Files for Oracle Support Services
PART_NO. SERIAL_NO.
7079395 476856Z+1514CE056G
INLET_TEMP
28.000 degree C
7047410 476856F+1242CE0020
7047410 476856F+1242CE004J
EXHAUST TEMP
31.250 degree C 34.188 degree C
31.250 degree C 34.188 degree C
Chapter 15
EXHAUST_TEMP
34.938 degree C
15-12