Oracle X6-2-HA Deployment And User's Manual page 425

Running ORAchk on Oracle Database Appliance 18.3 Baremetal Systems for
New Installation
When you install Oracle Database Appliance 18.3, the ORAchk RPMs are installed in
the directory /opt/oracle.SupportTools/orachk/. You can verify that ORAchk
is installed by running the following command:
[root@oak bin]# rpm -q orachk
orachk-18.3.0_20180808-2.x86_64
Run orachk as follows:
[root@oak bin]# orachk
This computer is for [S]ingle instance database or part of a [C]luster to
run
RAC database [S|C] [C]: S
orachk did not find the inventory location on oak from environment. Does
oak
have Oracle software installed [y/n][n]? n
...
Detailed report (html) -
/opt/oracle.SupportTools/orachk/orachk_oak_091918_182425/
orachk_oak_091918_182
425.html
UPLOAD [if required] -
/opt/oracle.SupportTools/orachk/orachk_oak_091918_182425.zip
Running orachk on Oracle Database Appliance Baremetal Systems for Releases
Earlier than 18.3
Open the command-line interface as root.
1.
Navigate to the ORAchk tool in the /suptools directory.
2.
/u01/app/12.2.0.1/grid/suptools/orachk
Run the utility.
3.
./orachk
When all checks are finished, a detailed report is available. The output displays
the location of the report in an HTML format and the location of a zip file if you
want to upload the report.
Review the Oracle Database Appliance Assessment Report and system health
4.
and troubleshoot any issues that are identified.
The report includes a summary and filters that enable you to focus on specific
areas. For example, you can choose the filter to show failed checks only, show
checks with a Fail, Warning, Info, or Pass status, or any combination.
Using the Oracle ORAchk Health Check Tool
Chapter 15
15-7