Oakcli Configure Vm - Oracle X6-2-HA Deployment And User's Manual

–
• The driver domain only works when you add virtual disks to a guest virtual
machine. When -driverdomain is specified, the cloned virtual machine is in driver
domain mode. The corresponding virtual machine configuration file, vm.cfg, has
the following disk entries:
When -driverdomain is specified, the cloned virtual machine is in driver domain
mode. The corresponding virtual machine configuration file, vm.cfg, has the
following disk entries:
disk = [u'file:/OVS/Repositories/repo5/.ACFS/snaps/vm10/
VirtualMachines/
vm10/System.img,xvda,w',
u'file:/u01/app/sharedrepo/repo5/.ACFS/snaps/
vm10/VirtualMachines/vm10/u01.img,xvdb,w,oakDom1']
All disks, with the exception of the xvda boot disk, have the path from oakDom1,
that is odabase.
• The driver domain functionality applies to non-system disks. Once a virtual
machine is created in driver domain mode, any new vDisks are added in driver
domain mode.
• To determine if a virtual machine is configured in driver domain mode, use the
oakcli show vm vmname command. When the virtual machine is in driver mode,
the output for the DriverDomain attribute is TRUE.
Example 14-46
Create a virtual machine image named myol6u_test from the virtual machine template
named myol6u_15gb1, which is stored in the shared repository named repo2 on Node
0:
oakcli clone vm myol6u_test -vmtemplate myol6u_15gb1 -repo repo2 -node 0
Example 14-47
Create a virtual machine image named myol6u_test from the virtual machine template
named myol6u_15gb1, which is stored in the shared repository named repo2 on Node
0 in driver domain mode:
oakcli clone vm myol6u_test -vmtemplate myol6u_15gb1 -repo repo2 -node 0 -
driverdomain

oakcli configure vm

Use the oakcli configure vm command to configure a virtual machine on Oracle
Database Appliance Virtualized Platform and to increase or decrease resource
allocation to user domains.
You must restart the domain for the resource allocation change to take effect.
Oracle Solaris 11.3 or higher x86.
Creating a Virtual Machine Image
Creating a Virtual Machine Image in Driver Domain Mode
Chapter 14
oakcli Virtual Machine Commands
14-68