Oracle X6-2-HA Deployment And User's Manual page 361

Example 14-10
The command oakcli deploy creates a log file that is prepended with the character
string STEP*. The log file is stored in the following location:
/opt/oracle/oak/onecmd/tmp/
oakcli expand storage
Use the oakcli expand storage command to configure the solid-state drives (SSDs)
for data storage into the existing base configuration to fully populate the base storage
shelf.
File Path
$ORACLE_HOME/opt/oracle/oak/bin/oakcli
Syntax
oakcli expand storage [-h]
Parameters
Parameter
-h
Usage Notes
After all disks are inserted into the slots, execute the oakcli expand storage
command on both nodes. First on the master node and then wait for 30 seconds and
execute from the slave nodes. It takes about 10 to 12 minutes to add all of the disks.
Review the procedure for how to add the storage shelf for detailed steps on how to
add the disks, the timing needed to avoid flooding disk events, and the steps to
validate that all disks are online and are in a good state.
Example 14-11
#oakcli expand storage
Precheck passed.
Successfully formatted 1.6TB SSD disks...
Check the progress of expansion of storage by executing 'oakcli show disk'
Waiting for expansion to finish ...
Related Topics
• Preparing for Storage Expansion
Review and perform these best practices before adding storage to the base shelf
or adding the expansion shelf.
• Adding the 10-Pack of SSDs
Add the 10-pack solid-state drives (SSDs) for data storage into the existing base
configuration to fully populate the base storage shelf.
Viewing the Log File
Expanding Storage
oakcli expand storage
Description
(Optional) Display help for using the
command.
Chapter 14
14-26