Oracle X6-2-HA Deployment And User's Manual page 343

• oakcli configure firstnet
Use the oakcli configure firstnet command to configure an initial
network on Oracle Database Appliance that enables you to download deployment
software.
• oakcli configure network
Use the oakcli configure network command to configure the network after
either replacing a network card or swapping the public network from copper to
fiber and vice versa. The meaning of the command changes depending on which
parameter you use.
• oakcli configure oda_base
Use the oakcli configure oda_base command to change the CPU core count
assigned to ODA_BASE, add or remove virtual local area networks assigned to
ODA_BASE, and adjust resource allocation among user domains and between
ODA_BASE and other user domains.
• oakcli configure repo
Use the oakcli configure repo command to increase the size of a shared
repository.
oakcli configure additionalnet
Use the oakcli configure additionalnet command to configure any unconfigured
public networks in bare metal, Domain 0, and ODA_BASE.
Syntax
oakcli configure additionalnet [-h]
Parameter
-h displays online help for using the command.
Usage Notes
The oakcli configure additionalnet command automatically detects any
unconfigured networks and runs an interactive script that guides you through how to
configure the network. The script requires the following input:
• Interface name
• DHCP [Y/N]
• IP
• Netmask
Note:
If you are running the command on a bare metal deployment, then the
interface name expects a bond name. If you are running the command on
Dom0, then the interface name expects a net name. If you are running the
command on Dom1, then the interface name expects an eth name.
Chapter 14
oakcli configure commands
14-8