Oracle X6-2-HA Deployment And User's Manual page 348

Parameter
reponame
size
-h
Increasing the Size of a Shared Repo
Increase the size of the repo1 shared repository by 2 gigabytes:
# oakcli configure repo repo1 -incsize 2G
Configured Shared Repo : repo1 with new size 3712.0.
oakcli copy
Use the oakcli copy command to prepare a copy of the configuration file for use
during the configuration of Oracle Database Appliance.
Syntax
oakcli copy -conf absolute_conf_file [-h]
Parameters
Parameter
absolute_conf_file
-conf
-h
Example 14-1
If you created a configuration file previously and copied this file to Oracle Database
Appliance, then prepare the configuration file to be used during the configuration
process. For example, if you copied the file myserver1.conf to /tmp, then enter the
following command:
oakcli copy -conf /tmp/myserver1.conf
oakcli create commands
Use the oakcli create commands to create components on Oracle Database
Appliance.
• oakcli create cpupool
Use the command oakcli create cpupool to create a CPU pool on one Oracle
Database Appliance Virtualized Platform node.
• oakcli create database
Use the oakcli create database command to create additional databases on
Oracle Database Appliance.
Description
Name of the shared repository
Number that can be followed by M to define the size as
megabytes or by G to define as size as gigabytes
(Optional) Display help for using the command.
Description
Specifies the full path name of the configuration file
(Optional) Display help for using the command.
Preparing a Copy of the Configuration File
Chapter 14
oakcli copy
14-13