Configure Command - Oracle X6-2-HA Deployment And User's Manual

Example 13-3
ODACLI Operations
To configure SUDO to allow a user to perform only selected ODACLI operations, add
lines to the commands section in the /etc/sudoers file as follows:
## DCS commands for oracle user
Cmnd_Alias DCSCMDS = /opt/oracle/dcs/bin/odacli describe-appliance
oracle ALL=
$ sudo /opt/oracle/dcs/bin/odacli describe-appliance
Appliance Information
----------------------------------------------------------------
System Information
----------------------------------------------------------------
Disk Group Information
----------------------------------------------------------------
DG Name
------------------------- ------------------------- ------------
Data
Reco
In this example, the user jdoe2 tries to run the sudo odacli list-databases
command, which is not part of the set of commands that is configured for that user.
SUDO prevents jdoe2 from running the command.
[jdoe2@servernode1 ~]$ sudo /opt/oracle/dcs/bin/odacli list-databases
Sorry, user jdoe2 is not allowed to execute '/opt/oracle/dcs/bin/odacli
list-databases' as root on servernode1.

Configure Command

Use the configure and update commands to configure the appliance.
• configure-firstnet
Use the command configure-firstnet to configure the first network in the
appliance after racking and connecting the power and network cables.
SUDO Example 2: Allow a User to Perform Only Selected
DCSCMDS
ID: a977bb04-6cf0-4c07-8e0c-91a8c7e7ebb8
Platform: OdaliteL
Data Disk Count: 6
CPU Core Count: 20
Created: October 24, 2017 6:51:52 AM HDT
Name: rwsodal001
Domain Name: example.com
Time Zone: America/Adak
DB Edition: EE
DNS Servers: 10.200.76.198 10.200.76.199 192.0.2.254
NTP Servers: 10.200.0.1 10.200.0.2
Redundancy
Normal
Normal
Chapter 13
Configure Command
Percentage
90
10
13-7