Oracle X6-2-HA Deployment And User's Manual page 342

In this example, the user jdoe2 tries to run the oakcli show databases command,
which is not part of the set of commands that is configured for that user. Sudo
prevents jdoe2 from running the command.
$ sudo /opt/oracle/oak/bin/oakcli show databases
Sorry, user oracle is not allowed to execute '/opt/oracle/oak/bin/oakcli
show databases' as root on servernode1.
See Also:
The SUDO man pages for more information about configuring and using
SUDO:
http://www.sudo.ws/sudo.html
oakcli add disk -local
Use the oakcli add disk -local command to add a local disk to the system after
physically replacing a failed disk.
Syntax
oakcli add disk -local
Usage Notes
• You cannot add more than two disks per node.
• You must remove the failed drive and replace it with a new drive before running
the oakcli add disk -local command.
• The new disk must be inserted into the slot before you run this command.
• The oakcli add disk -local command is supported only on bare metal
deployments. It is not supported on virtualized configurations.
oakcli configure commands
Use the oakcli configure commands to configure components on Oracle
Database Appliance.
• oakcli configure additionalnet
Use the oakcli configure additionalnet command to configure any
unconfigured public networks in bare metal, Domain 0, and ODA_BASE.
• oakcli configure asr
Use the oakcli configure asr command to configure Oracle Auto Service
Request (Oracle ASR) on Oracle Database Appliance.
• oakcli configure cpupool
Use the oakcli configure cpupool command to configure a CPU pool on one
Oracle Database Appliance Virtualized Platform node.
Chapter 14
oakcli add disk -local
14-7