Oakcli Show Raidsyncstatus; Oakcli Show Repo - Oracle X6-2-HA Deployment And User's Manual

oakcli show raidsyncstatus

Use the oakcli show raidsyncstatus command to display the status of the RAID
rebuild after a failed local disk is replaced.
Note:
The show raidsyncstatus command is only supported on a bare metal
platform; it is not supported on the virtualized platform. For general RAID
information, use the oakcli show iraid command.
Syntax
oakcli show raidsyncstatus [-h]
Parameter
(Optional) -h displays help for using the command.

oakcli show repo

Use the oakcli show repo command to display information about virtual machine
repositories.
Syntax
oakcli show repo [reponame -node 0|1] [-h]
Parameters
Parameter
reponame
-node
-h
To see all repositories, omit the repository name and node number. To see a specific
shared repository, include the repository name and node.
Examples
Here are examples of how to use the oakcli show repo command.
Example 14-30
Display the virtual machine repositories on Oracle Database Appliance Virtualized
Platform nodes:
oakcli show repo
Description
[Optional] Identifies a specific repository name
[Optional] Identifies the node number
[Optional] Display help for using the command.
Displaying the Available Virtual Machine Repositories
NAME REPOTYPE NODENUM
odarepo1 local 0
Chapter 14
oakcli show commands
or
0 1
14-47