Changing Oracle Database Appliance Passwords - Oracle X6-2-HA Deployment And User's Manual

Changing Oracle ILOM Password from the Console
In the Oracle ILOM console, from the Administration menu, select User
1.
Management, and then navigate to the User Accounts subtab.
Select root user and click Edit.
2.
Change the root user password.
3.
Changing Oracle ILOM Password Using CLI Commands
Connect to the Oracle ILOM console through SSH:
1.
# ssh -l root SP-ipaddr
Set the new password:
2.
# set /SP/users/root password=new_password
Changing password for user /SP/users/root/password...
Enter new password again: *********
New password was successfully set for user /SP/users/root

Changing Oracle Database Appliance Passwords

After deploying your appliance, ensure that you change the following passwords for
securing your system.
Changing the Oracle Installation Owner Passwords
During deployment, the root and database users SYS, SYSTEM and PDBADMIN are
set to the system password. After deployment, the oracle and grid passwords are also
set to the system password. Change the passwords to comply with your enterprise
user security protocols. Refer to the Oracle Database Appliance Security Guide and
Oracle Database Security Guide for information about the required configuration and
best practices to secure database systems.
Changing the oda-admin User Password through the Command-Line
Log in to the appliance as root.
1.
Run the odacli-adm set-credential command to reset the password. Enter the
2.
new password when prompted.
# odacli-adm set-credential --password --username oda-admin
Agent password: new password
Changing the the oda-admin User Password through the Web Console
Log into the Web Console using the user name oda-admin.
1.
Click About, then User Settings in the upper right corner of the Web Console.
2.
Enter the password in the Password field and the Password Confirmation field,
3.
then click Submit.
A confirmation message is displayed.
Changing Oracle Database Appliance Passwords
Chapter 6
6-2