Oracle X6-2-HA Deployment And User's Manual page 77

odabaseRepo/VirtualMachines/oakDom1/vm.cfg file
INFO: Running /sbin/losetup /dev/loop0 /OVS/Repositories/odabaseRepo/
VirtualMachines/oakDom1/System.img command to mount the image file
INFO: Mount is successfully completed on /dev/loop0
INFO: Created oda base pool
INFO: Validated dom0 and odabase version
INFO: Making change to the /OVS/Repositories/odabaseRepo/
VirtualMachines/oakDom1
/tmpmnt/boot/grub/grub.conf file
INFO: Assigning IP to the first node...
INFO: Created oda base pool
INFO: Starting ODA Base...
INFO: Starting ODA Base...
Using config file "/OVS/Repositories/odabaseRepo/VirtualMachines/
oakDom1/vm.cfg"
.
Started domain oakDom1 (id=1)
INFO: Storing the odabase configuration information
Using config file "/OVS/Repositories/odabaseRepo/VirtualMachines/
oakDom1/vm.cfg"
Started domain oakDom1 (id=1)
INFO: Storing the odabase configuration information
#
The ODA_BASE setup is complete.
Verify that your deployment of ODA_BASE is valid and that ODA_BASE is
4.
configured.
• Run the command xm list to confirm that ODA_BASE is configured. When
properly deployed, oakDom1 appears in the output with your configured
memory and vcpus.
# xm list
Name
State Time(s)
Domain-0
r----- 482672.4
oakDom1
b---- 132134.6
• Run the command oakcli show oda_base
# /opt/oracle/oak/bin/oakcli show oda_base
ODA base domain
ODA base CPU cores
ODA base domain memory :32
ODA base template
ODA base vlans
ODA base current status :Running
Installing Virtualized Platform Software and Deploying the Appliance
:2
:/OVS/oda_base_18.3.tar.gz
:[ 'priv1', 'net1']
Chapter 5
ID Mem VCPUs
0 4096 40
2 32768 4 -
5-7