Odacli Apply Patch And Update Commands - Oracle X6-2-HA Deployment And User's Manual

Database appliance
Hide thumbs Also See for X6-2-HA:
Table of Contents

Advertisement

Shutting down interface p1p2:
Shutting down loopback interface:
Bringing up loopback interface:
Bringing up interface em1:
Bringing up interface em2: Determining if ip address 10.1.10.2 is already
in use for device em2...
Bringing up interface em3:
Bringing up interface p1p1: Determining if ip address 192.0.2.24 is
already in use for device p1p1...
Bringing up interface p1p2: Determining if ip address 192.0.2.25 is
already in use for device p1p2...

odacli Apply Patch and Update Commands

Use the commands odacli update and apply patch to apply patches and update the
appliance.
odacli describe-component
Use the odacli describe-component command to display the installed
version and the latest available version for each component.
odacli describe-latestpatch
Use the odacli describe-latestpatch command to display a list of the
latest supported patch versions for each component.
odacli create-prepatchreport
Use the odacli create-prepatchreport command to run pre-checks for
patching.
odacli describe-prepatchreport
Use the odacli describe-prepatchreport command to display the pre-
check report, with a list of pre-checks run with status and comments.
odacli update-agentconfig-parameters
Use the odacli update-agentconfig-parameters command to modify
configuration variables used by the appliance.
odacli list-agentconfig-parameters
Use the odacli list-agentconfig-parameters command to list
configuration variables used by the appliance.
odacli list-availablepatches
Use the odacli list-availablepatches command to display all available
patches for Oracle Database Appliance.
odacli list-prepatchreports
Use the odacli list-prepatchreports command to display all pre-check
reports, with a list of pre-checks run with status and comments.
odacli delete-prepatchreport
Use the odacli delete-prepatchreport command to delete any pre-check
report.
odacli Apply Patch and Update Commands
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
Chapter 13
13-10

Advertisement

Table of Contents
loading

Table of Contents