Oracle X6-2-HA Deployment And User's Manual page 218

bonding: btbond1: Removing slave em3.
bonding: btbond1: releasing active interface em3
::::::::::
Example 13-5 Configuring the First Network as a Non-Bonded Network
The following is an example of a non-bonded configuration. For a non-bonded
configuration, answer no to using a bonding public interface.
# configure-firstnet
Using bonding public interface (yes/no) [yes]: no
INFO: Breaking the bonding on btbond1
INFO: remove bonding module: rmmod bonding
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em2
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em3
INFO: Restarting the network
Shutting down interface em1:
Shutting down interface p1p1:
Shutting down interface p1p2:
Shutting down loopback interface:
Bringing up loopback interface:
Bringing up interface em1:
Bringing up interface em2:
Bringing up interface em3:
Bringing up interface p1p1: Determining if ip address 192.168.16.24 is
already in use for device p1p1...
Bringing up interface p1p2: Determining if ip address 192.168.17.24 is
already in use for device p1p2...
INFO: Restarting the network
Select the Interface to configure the network on (em2 em3) [em2]:
Configure DHCP on em2 (yes/no) [no]:
INFO: You have chosen Static configuration
Enter the IP address to configure : 10.1.10.2
Enter the Netmask address to configure : 255.255.255.0
Enter the Gateway address to configure[10.1.10.1] :
INFO: Plumbing the IPs now
/usr/share/system-config-network/netconfpkg/NCHostsList.py:100:
DeprecationWarning: BaseException.message has been deprecated as of Python
2.6
badlines.append((num, value_exception.message))
/usr/share/system-config-network/netconfpkg/NCHostsList.py:105:
DeprecationWarning: BaseException.message has been deprecated as of Python
2.6
""" % (value_exception.message, num)
/usr/share/system-config-network/netconfpkg/NCProfileList.py:142:
DeprecationWarning: BaseException.message has been deprecated as of Python
2.6
self.error = e.message
INFO: Restarting the network
Shutting down interface em1:
Shutting down interface em2:
Shutting down interface em3:
Shutting down interface p1p1:
Chapter 13
Configure Command
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
13-9