Oracle X6-2-HA Deployment And User's Manual page 139

When oakd restarts on both nodes, run the command odaadmcli show disk on
10.
both nodes.
All 24 disks of the expansion storage shelf e1_pd_xx are displayed with the
status"UNKNOWN NewDiskInserted: in the command output on both nodes. For
example:
e0_pd_23 /dev/sdab SSD ONLINE Good
e1_pd_00 /dev/sdax SSD UNKNOWN
NewDiskInserted
...
e1_pd_23 /dev/sdbu SSD UNKNOWN
NewDiskInserted
Run the command odaadmcli add jbod disk on the master node first, and
11.
then on the slave node.
# odaadmcli add jbod disk
Sat Jun 30 01:04:08 UTC 2018
Successfully formatted 1.6TB SSD disks...
Check addition of JBOD status by executing
odaadmcli ' show jbod progress'
Wait for the command to finish. It takes about 10 to 12 minutes. Then verify that
the expansion storage shelf disk status is ONLINE GOOD. If yes, proceed to next
step.
Run the command odaadmcli add jbod asm on the master node first, and
12.
then on the slave node.
Wait for the command to finish. It takes about 2 to 3 minutes. Then verify that
the expansion storage shelf disk status in ASM is ONLINE and CACHED.
Run the command show jbod status to check Oracle ASM disk group and
13.
disk status.
# odaadmcli show jbod status
INFO: 2018-06-30 01:32:46: Present status of Expansion storage shelf
Disk Added Disk Not Added
OAKD 24
ASM
DATA 20
RECO 20
REDO 4
INFO: 2018-06-30 01:32:46: DiskGroup Mount Status
GROUP_NUMBER NAME
1 DATA MOUNTED
2 REDO MOUNTED
3 RECO MOUNTED
Use the odaadmcli show validation storage errors command to show
14.
hard storage errors.
Hard errors include having the wrong type of disk inserted into a particular slot, an
invalid disk model, or an incorrect disk size.
Status
0 SUCCESS
0 SUCCESS
0 SUCCESS
0 SUCCESS
STATE TYPE
HIGH 39321600
HIGH 1525760
HIGH 6461440
Chapter 10
Adding the Storage Expansion Shelf
TOTAL_MB FREE_MB
37272260
1383896
5984272
10-10