Oracle X6-2-HA Deployment And User's Manual page 344

oakcli configure asr
Use the oakcli configure asr command to configure Oracle Auto Service Request
(Oracle ASR) on Oracle Database Appliance.
Syntax
oakcli configure asr [-h]
Parameter
-h displays help for using the command.
Usage Notes
• The oakcli configure asr command initiates an interactive script that requests
the following information to implement Oracle ASR on Oracle Database Appliance:
–
–
–
–
• You can configure Oracle ASR on Oracle Database Appliance to use its own ASR
Manager (internal Oracle ASR) or use Oracle ASR Manager configured on
another server in the same network as your appliance (external Oracle ASR). If
you already have Oracle ASR Manager configured in your environment, you can
register Oracle Database Appliance with your existing Oracle ASR Manager.
Configuring Oracle ASR
# oakcli configure asr
INFO
scaoda1011-20150805153300.log and traces in /opt/oracle/oak/onecmd/tmp/
scaoda1011-20150805153300.trc
Please enter
1 to setup Internal ASR
2 to setup External ASR
3 to Deinstall ASR
0 to Exit
Action to be performed (setup internal, setup external, deinstall, or reconfigure
Oracle ASR Manager)
PROXY server name, port, user ID, and password
Oracle ASR user ID and password
Oracle ASR Manager IP and port
Note:
With an internal Oracle ASR Manager, an alert is not sent when the
server goes down. If a critical event occurs on Oracle Database
Appliance with an external Oracle ASR Manager, then an alert can still
be sent to Oracle.
: Logging all actions in /opt/oracle/oak/onecmd/tmp/
Chapter 14
oakcli configure commands
14-9