Oakcli Show Vm - Oracle X6-2-HA Deployment And User's Manual

Parameters
Parameter
-attachvdisk
-detachvdisk
-s
key1:value1;key2:value
2;...
-addnetworkvlanname
-deletenetworkvlanname
-h
Usage Notes
• Do not use the -attachvdisk or the -detachvdisk option with the -addnetwork, -
deletenetwork, or -s parameters.
• Include only one of the -addnetwork, -deletenetwork, or -s parameters when you
use this command.
Example 14-48
Update the root user password for the gc_11g virtual machine:
oakcli modify vm gc_11g -s "com.oracle.linux.root-password:password"

oakcli show vm

Use the oakcli show vm command to display information about virtual machines.
Syntax
oakcli show vm [vm_name | -h]
Parameters
Parameter
vm_name
-h
Usage Notes
When a virtual machine is configured in driver domain mode, the output of the oakcli
show vm vmname command displays TRUE for the DriverDomain attribute.
Description
(Optional) Attaches the named VDisk (virtual disk) to the named
vdisk_name
virtual machine.
(Optional) Detaches the named VDisk disk from the named
vdisk_name
virtual machine.
(Optional) Identifies a message consisting of one or more
semicolon separated key:value pairs to send to the ovmd utility.
Each key and value is separated by a colon (:) and each key/
value pair is separated from the next key/value pair by quotation
marks.
(Optional) Adds a VLAN network to the named virtual machine.
(Optional) Removes a VLAN network from the named virtual
machine.
(Optional) Displays help for using the command.
Sending a Message to a Running Virtual Machine
Description
(Optional) The name of the virtual machine for which details
should be displayed. If you do not specify this parameter, then
information for all the virtual machines is displayed.
(Optional) Display help for using the command.
Chapter 14
oakcli Virtual Machine Commands
14-72