Oracle X6-2-HA Deployment And User's Manual page 369

Parameter
-reco size
-redo size
-db db_name
-h
Example 14-19
Increase the size of the volume by 10 GB on the DATA volume:
oakcli resize dbstorage -data 10
oakcli restart oda_base
Use the oakcli restart oda_base command to stop and restart ODA_BASE on
the local node.
Use this command only when you are not concerned about the current status of
ODA_BASE, because it performs a forced shutdown. You must run this command
from Dom0. Typically, if ODA_BASE needs to be restarted, then you must restart it on
both nodes.
Syntax
oakcli restart oda_base [-h]
The ODA_BASE that you want to restart is on the same node as the Dom0 from which
you run this command.
Parameter
(Optional) -h displays help for using the command.
oakcli show commands
Use the oakcli show commands to display the status of Oracle Database Appliance
components.
The oakcli show commands display status information for the node where you run
the command. To see the list of components available on the current node, use the
help option: oakcli show -h:
Description
Extendable size in GB for the REDO volume.
Extendable size in GB for the RECO volume.
Database for which these volumes must be resized.
(Optional) Display help for using the command.
Increasing the Size of the DATA Volume
Chapter 14
oakcli restart oda_base
14-34