Roland R1000 Series Manual page 92

Start-up
System parameter 23: Display of the MAC ID for ProfiNet bus systems.
system parameter: 23
unit MAC ID
Fig. 86: MAC-ID
The MAC ID is displayed, when the system is equipped with a Profinet bus system.
System parameter 24: Fieldbus diagnostics
system parameter: 24
fieldbus diagnostic
Fig. 87: Fieldbus diagnostics
This parameter is split into 4 subgroups:
a) Internal Fieldbus information (not displayed here)
b) Parameter channel IN/OUT
c) Process channel OUT
d) Process channel IN
Parameter channel IN / OUT
system parameter: 24
IN/OUT Bus.proc.data
PaI:0000000000000000
PaO:0000000000000000
„0" stands for the outgoing data to the Fieldbus and „I" for the incoming data from the Fieldbus. The bytes are shown
hexadecimal.
Process channel OUT
system parameter: 24
IN/OUT Bus.proc.data
PzO:000000
000000 000000 000000
Output PzO: 00
Byte 8
00 00
15 16
92
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
000000
00 00 00 00
9 10 11 12
00 00 00 00
17 18 19 20
Manual
Input PaI: 00 00
Byte 0 1
Output PaO: 00 00
Byte 0 1
O "stands for the outgoing data to the fieldbus and"
I "for the incoming data from the fieldbus. The bytes
are represented in hexadecimal.
00 00
13 14
00 00 00
21 22 23
B0063191 / 1.3
00 00 00 00 00
2 3 4 5 6
00 00 00 00 00
2 3 4 5 6
00
7
00
7