Start-up
7.9
System parameters
The general adjustments are specified by configuring the system parameters.
For accessing, select the "system parameter configuration" mode and confirm with ENTER.
System parameter 1: Setting the dialogue language.
system parameter:
language
english
Fig. 61: Selecting the language
Selectable languages:
•
English
•
German
•
Italian (in preparation)
•
French (in preparation)
•
Spanish (in preparation)
System parameter 2: Determine the type of system.
system parameter:
system type
standard
Fig. 62: System type
The type of the system cannot be modified
System parameter 3: Selecting the dimensions for the display (mm / inch).
When changing the measurement units, the sheet metal thicknesses of the stored program
parameters are also converted into the new dimension.
system parameter:
display value in
Fig. 63: Selecting the dimensions for the display
84
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
Note
The selected system configuration should be documented in the form
"System configuration" at the end of this manual or in the equipment
documentation. This information is required in case a system needs to be
exchanged.
1
2
3
mm
Manual
B0063191 / 1.3