B0063191 / 1.3
6.5.3
External single measurement via external inputs
Fig. 26: Timing diagram for external single measuring via external inputs
1)
At "function error" the "function result" not set mandatory.
2)
The measuring time depends on the time set for averaging.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
Note
The operation of the individual measurement, which is initiated via the
external input, can be controlled via the process channel, see section
"6.3.2 Start single measurement via process channel". If no control is
done via the process channel, then the measurement operation must be
controlled by the signal "ENABLE", see section "6.5.1 Signal ENABLE".
Manual
Communication with the PLC
57