Table of Contents
Advertisement
.
Rack-mount and ground PRI Gateway
components
This chapter contains information about the following topics:
•
"Introduction" (page 51)
•
"Rack-mount a PRI Gateway" (page 51)
•
"Ground a PRI Gateway" (page 52)
Introduction
This chapter contains the procedures for mounting components into the
customer-supplied, 480 mm (19 in.) rack.
This chapter contains the following procedures:
•
Procedure 1 "Rack-mounting a PRI Gateway" (page 51)
•
Procedure 2 "Grounding PRI Gateway components" (page 52)
For more information about the layout of a CS 1000E equipment rack, see
Communication Server 1000E Installation and Commissioning.
Rack-mount a PRI Gateway
To install the PRI Gateway in a 480 mm (19 in.) rack, the following items
are required:
•
equipment layout plan
•
a 480 mm (19 in.) rack
•
four .216 - 24 X .500 STL 289A screws (code P097F813)
Procedure 1
Rack-mounting a PRI Gateway
Media Gateway 1000E PRI Gateway Installation and Commissioning
ATTENTION
The 480 mm (19 in.) rack is a customer supplied item.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
51
Advertisement
Table of Contents
