Nortel 1000E PRI Installation And Commissioning Manual page 98

98 Configure an E1/T1 card
Prompt Response
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
... ...
xx
ICOG
SRCH (LIN) RRB
xxx..x
ACOD
TARG 0-(1)-31
... ...
Procedure 27 "Configuring PRI2 trunk routes using LD 16" (page
98) describes how to configure Route Data Block data required for
PRI2/E1 trunks. The example given in
(page 98)
is also supported on other PRI2 interface types.
Procedure 27
Configuring PRI2 trunk routes using LD 16
Step
1
2
3
Table 28
PRI2 route (LD 16)
Prompt Response
aaa
REQ
TYPE RDB
xx
CUST
ROUT 0 - 511
... ...
Media Gateway 1000E PRI Gateway Installation and Commissioning
Description
Select a digital trunk type of 2.0 Mb/s PRI.
Integrated Services Digital Network.
ISDN PRI route.
NI-2 TR-1268 interface type.
Either incoming, outgoing, or both way trunks.
Search method for outgoing trunk member.
One seven-digit access code for the trunk route.
Trunk Access Restriction Group Number.
is specific to the EURO interface, however, the PRI trunk route
Action
Log on to the CS 1000E.
To access LD 16, enter:
LD 16
Enter the responses shown in
(page 98).
Description
Request (aaa = CHG, NEW)
Route Data Block.
Customer number, as defined in LD 15.
Route number. Range the same as for Large System and
CS 1000E system.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
--End--
Table 28 "PRI2 route (LD 16)"
Table 28 "PRI2 route (LD 16)"