Table of Contents
Advertisement
68 Connect PRI Gateway components
Procedure 9
Connecting a Media Gateway Controller to the ELAN subnet
Step
1
2
Connect a Media Gateway Controller to the TLAN subnet
Follow the steps in
to the TLAN subnet" (page 68)
Procedure 10
Connecting a Media Gateway Controller to the TLAN subnet
Step
1
2
Connect a Media Gateway Controller to the E1/T1 card
Follow the steps in
to the E1/T1 card" (page 68)
Procedure 11
Connecting a Media Gateway Controller to the E1/T1 card
Step
1
2
Media Gateway 1000E PRI Gateway Installation and Commissioning
Action
Connect a standard CAT5 patch cable to the ELAN network
interface on the adaptor.
Connect the other end of the standard CAT5 patch cable to an
RJ-45 ELAN network interface on the Layer 2 switch.
Procedure 10 "Connecting a Media Gateway Controller
Action
Connect a standard CAT5 patch cable to the TLAN network
interface on the adaptor.
Connect the other end of the standard CAT5 patch cable to an
RJ-45 TLAN network interface on the Layer 2 switch.
Procedure 11 "Connecting a Media Gateway Controller
Action
Connect a RJ-45 shielded Ethernet cable to the ELAN
connection.
Connect the RJ-45 shielded Ethernet cable to the CE ports on
the MGC.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
--End--
to connect an MGC to the TLAN subnet.
--End--
to connect the MGC to the E1/T1 card.
--End--
Advertisement
Table of Contents
