Table of Contents
Advertisement
140 Reports, upgrades, and backups
Procedure 58
Performing a software upgrade through upload
Step
1
2
3
4
5
Check software upgrades
To check the status of the last software upgrade, and to confirm if an
upgrade succeeded or failed, follow
of software upgrades" (page
Media Gateway 1000E PRI Gateway Installation and Commissioning
Action
On the Home - System Overview window, click Upgrades >
Upgrade the Software.
The window shown in
from a PC" (page 140)
Figure 41
Upgrade the Software window from a PC
Click Browse and select the software file.
Click Upload.
To complete the installation of the software, click Upgrade &
Restart.
The E1/T1 card installs the new software and restarts the
system. Because the system restarts, your Web session ends.
You must log on again to resume working through the Web
interface
If the upgrade fails, or if you want to check the status of the
upgrade, check the details on the View Last Upgrade Details
window. See
"Check software upgrades" (page
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Figure 41 "Upgrade the Software window
appears.
--End--
Procedure 59 "Checking the status
141).
140).
Advertisement
Table of Contents
