Table of Contents
Advertisement
Table 34
Parameters for E1 spans
Parameter
CRC4
Impedance
Shield Ground
Media Gateway 1000E PRI Gateway Installation and Commissioning
ATTENTION
For E1 spans on the E1/T1 card, the CRC4 parameter on
the Web interface is automatically overridden by the Call
Server configuration if a mismatch between the Web interface
configuration and the Call Server configuration exists.
e To save the parameters, click Submit.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Configure ISDN E1/T1 trunks 123
Value
No
120 ohm
No—for 75 Ohm only
--End--
Advertisement
Table of Contents
