Table of Contents
Advertisement
26 Installation summary
ELAN
Device
connection
DB2
NA
PRI
1 - 100baseT
connected
to CE on the
MGC *
* This is the recommended connection; however, you can connect to an external switch.
Installation tasks
Table 3 "List of required installation tasks" (page 26)
involved in installing and configuring a PRI Gateway.
Table 3
List of required installation tasks
Task
Rack-mounting and grounding the PRI Gateway
Installing the MGC card and DSP DBs
Installing an E1/T1 card and installing its
associated daughterboards
Connecting the components in a PRI Gateway
Configuring the PRI Gateway, the MGC card,
and the DSP daughterboards
Configuring an E1/T1 card
Media Gateway 1000E PRI Gateway Installation and Commissioning
ELAN
Address
port
requirement
NA
NA
Ethernet
1 TCP/IP
Address in
the same
subnet as the
MGC
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
TLAN
TLAN
connection
port
NA
NA
NA
NA
See
"Rack-mount and ground PRI Gateway
components" (page 51)
"Install a Media Gateway Controller and DSP
daughterboard" (page 53)
"Install an E1/T1 card and daughterboards"
(page 55)
"Connect PRI Gateway components" (page 63)
"Configure the Media Gateway Controller and
DSP daughterboards in a PRI Gateway" (page
69)
"Configure an E1/T1 card" (page 83)
Address
requiremen
t
1 Address
in existing
T-LAN
network,
must be in
the same
subnet as
the MGC
NA
lists the tasks
Advertisement
Table of Contents
