Table of Contents
Advertisement
In
Figure 35 "PRI startup" (page
(For the DCH, the red LED is lit.)
Figure 35
PRI startup
2
To test all PRIs, enter:
LD 60
DISL loop
SLFT loop
The response is:
SLFT OK.
3
To enable all configured PRIs, enter:
LD 60
ENLL loop
The PRI loop is now up, the remote alarm is cleared, and the
D-channel is disabled.
4
To enable the NTBK51AA/NTBK51CA DDCH daughterboard,
enter:
LD 96
ENL MSDL sl s c
The DDCH card is downloaded and enabled. The D-channel is
disabled.
5
To enable the D-channels, enter:
LD 96
ENL DCH X
If the D-channel is established, the response is:
DCH EST time and date
If you do not get the DCH EST time and date response, enter
EST DCH x.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
PRI startup 129
129), the PRI shown is disabled.
Advertisement
Table of Contents
