Install An E1/T1 Card And Daughterboards Introduction - Nortel 1000E PRI Installation And Commissioning Manual

.
Install an E1/T1 card and
daughterboards
This chapter contains information about the following topics:
•
"Introduction" (page 55)
•
"Install NTBK51AA/NTBK51CA and NTAK93AB daughterboards" (page
56)
•
"Remove NTBK51AA/NTBK51CA and NTAK93AB daughterboards"
(page 57)
•
"Install an E1/T1 expansion daughterboard" (page 57)
•
"Install an E1/T1 card" (page 60)
Introduction
This chapter describes the procedures involved in installing the E1/T1 card
and its associated daughterboards as follows:
•
Install the downloadable D-channel (DDCH) daughterboard
(NTBK51AA/NTBK51CA) to support PRI/PRI2 protocols and
the D-channel interface (DCHI) daughterboard (NTAK93AB)
for DPNSS/DASS protocols. See
NTBK51AA/NTBK51CA and the NTAK93AB daughterboards on an
E1/T1 card" (page
•
Install the E1/T1 expansion daughterboard on the E1/T1 card (optional
for eight-span configuration). See
expansion daughterboard" (page
•
Install the E1/T1 card on the PRI Gateway chassis. See
"Installing an E1/T1 card on a PRI Gateway chassis" (page
This chapter also describes how to remove a daughterboard. See
Procedure 5 "Removing NTBK51AA/NTBK51CA and NTAK93AB
daughterboards from an E1/T1 card" (page
Media Gateway 1000E PRI Gateway Installation and Commissioning
56).
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Procedure 4 "Installing
Procedure 6 "Installing an E1/T1
58).
57).
55
Procedure 7
60).